Defence Online

Type of document: Contract Notice
Country: United Kingdom

1. Title: SECURITY GATES AND FENCING
2. Awarding Authority: BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty), GB. Web: www.balfourbeatty.com/
3. Contract type: Public works contract
Open
4. Description: The specified project (the Project) will control CSO discharges by intercepting and diverting combined sewage flows into a new storage and transfer tunnel. The main tunnel will run from Acton Storm Tanks in west London to Abbey Mills Pumping Station in the east, where it will connect to the Lee Tunnel, which will transfer the combined sewage to Beckton Sewage Treatment Works for treatment. The Project extends from Acton Storm Tanks in west London, to Abbey Mills Pumping Station in east London. The Project includes associated works at Beckton STW, Shad Thames Pumping Station and Bekesbourne Street.
The geographic layout of the Project and local authorities through which it passes is shown in Figure 1.
The Project comprises:
tunnels:
a main tunnel which will capture and store combined sewage from CSOs along its route and transfer it to Abbey Mills Pumping Station, from where the Lee Tunnel will transfer it for treatment at Beckton Sewage Treatment Works
11 connection tunnels, which will link flows from CSOs to the main tunnel.
Worksites:
five main tunnel Worksites (drive and/or reception sites)
16 CSO Worksites
two System modification Worksites Thames Tideway Tunnel
works at Beckton Sewage Treatment works.
Section 4: Scope of Works
BMB JV require an experienced Subcontractor to install high security gates and fence at Hammersmith Pumping Station Site (HAMPS). The security gates and fence will demarcate and protect the boundary between Fulham Reach Development and Thames Water. This will include the replacement of a vehicle gate and installation of a new pedestrian gate on Chancellor’s Road boundary.
gate 4 drawings for the works, the successful Subcontractor will be required to produce fabrication drawings to gate 5 for approval by the Contractor.
The new fence is specified as high security proprietary Zaun Armaweave – refer to drg: ‘3320-AAJVX-TTWES-420-CR-DR-000106’ for full specifications. The perimeter is highlighted in drg ‘3320-AAJVX-HAMPS-590-LZ-DR-000200 – Marked Up’.
The area will be cleared and filled to substrate level by BMB JV. The Subcontractor will be required to construct the foundations and install the gate as per 3320-AAJVX-HAMPS-590-LZ-DR-000200 and 3320-AAJVX-HAMPS-590-LZ-DR-000300.
5. CPV Code(s): 45000000, 45421148, 34928200, 35000000, 45340000
6. NUTS code(s): UKI, UKI3, UKI33, UKG31
7. Main site or location of works, main place of delivery or main place of performance: Thames Tideway Tunnel – C405 Main Works West – Hammersmith
The main tunnel will run from Acton Storm Tanks in west London to Abbey Mills Pumping Station in the east, where it will connect to the Lee Tunnel, which will transfer the combined sewage to Beckton Sewage Treatment Works for treatment. The Project extends from Acton Storm Tanks in west London, to Abbey Mills Pumping Station in east London. The Project includes associated works at Beckton STW, Shad Thames Pumping Station and Bekesbourne Street.
Delivery point West London sites as above
8. Reference attributed by awarding authority: Not provided.
9. Estimated value of requirement: Not provided.
10. CompeteFor response deadline 19.2.2021 (12:00:00).
11. Address to which they must be sent: Note: This is a CompeteFor opportunity. Opportunities may be with both public and private sector businesses. To apply, please click the following link to register on the CompeteFor portal Web:
12. Other information: Opportunity Method Contract Opportunity
Opportunity Status Open
Opportunity Type Private Sector
Notice Type Notice
Nature of Opportunity Works
Procedure type Open
Estimated contract value (GBP) Not disclosed
About the buyer’s selection process:
Returned quotations will be evaluated by BMB JV’s (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty) Procurement team in conjunction with our design and engineering teams.
Quotations will be evaluated based on;
Cost
Timeliness of return
Adherence to and demonstration of understanding of the drawings and specifications provided at this point.
Provision of accurate product specifications to accompany the quotation.
Supplier experience of similar projects,evidence of this will be requested should the initial quotation be of interest.
Should the candidate supplier be shortlisted they will then be contacted directly by a member of the BMB Procurement Team within two weeks of shortlisting to discuss the requirement in detail.
About the buyer:
BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty)
Details of specialist staff required (if any) Not Applicable
Estimated tender close date 26/02/2021
Estimated contract award date 05/03/2021
Estimated contract start date 12/03/2021
Estimated contract end date 31/05/2021
Opportunity Posted Date 09/02/2021
Is SME No
Is VCO No
Is framework agreement No
Additional information for bidders Include any special notes for bidders BMB-JV Tideway West, Hammersmith Pumping Station, Distillery Road, Hammersmith, W6 9AD
Please refer the website above for documentation
TKR-202129-EX-1552662