Defence Online

Type of document: Invitation to tender
Country: United Kingdom
OJEU Ref: (2016/S 248-456477/EN)
Nature of contract: Service contract
Procedure: Restricted procedure
Regulation of procurement: EU
Type of bid required: Global bid

Contract notice
Services
Directive 2009/81/EC
Section I: Contracting authority
I.1) Name addresses and contact point(s):
Ministry of Defence, Weapons, Defence General Munitions (DGM) Project Team
#4115, Fir 1c, ABW
Bristol
Postal code: BS34 8JH
United Kingdom
Phone: +44 3067983949
Email: DESWpnsDGM-ComrclMultiuser@mod.uk
Internet Address(es):
General address of the contracting authority:
Further information can be obtained from: The above mentioned contact point(s)
Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)
Tenders or requests to participate must be sent to: The above mentioned contact point(s)
I.2) Type of the contracting authority:
Ministry or any other national or federal authority, including their regional or local sub-divisions
I.3) Main activity:
Defence
I.4) Contract award on behalf of other contracting authorities/entities:
The contracting authority is purchasing on behalf of other contracting authorities: No
Section II: Object of the contract:
II.1) Description:
II.1.1) Title attributed to the contract by the contracting authority/entity: DGM/1801.
II.1.2) Type of contract and location of works, place of delivery or of performance:
Services
Service category No 3: Air transport services of passengers and freight, except transport of mail
Main site or location of works, place of delivery or of performance: Bristol, City of.
Nuts code: UKK11
II.1.3) Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)
II.1.4) Information on framework agreement
II.1.5) Short description of the specific contract:Weapons and ammunition disposal services. Disposal of Surplus/Out of Life Munitions.
II.1.6) Common procurement vocabulary (CPV): 90523100,
II.1.7) Information about Government Procurement Agreement (GPA):
The contract is covered by the Government Procurement Agreement (GPA):
II.1.8) Lots:
The contract is divided into lots: No
II.1.9) Information about variants:
Variants will be accepted: NO
II.2) Quantity or scope of the contract:
II.2.1) Total quantity or scope:
In support of MoD’s strategy to have alternative routes in place for the disposal of surplus/shelf life expired munitions across the full munitions inventory, the Defence General Munitions Project Team (DGM PT) is potentially seeking to place a Framework Agreement with one or more supplier for the provision of a task-based disposal service for a period up to 5 years.
The scope is for munition transportation from Depots in United Kingdom and subsequent disposal of ammunition in a safe, environmentally responsible and cost effective way. This task-based service is specifically intended to provide a flexible option to dispose of mixed natures in economic tranches, sometimes at relatively short notice.
Disposal must be undertaken in accordance with applicable UK, national and EU legislation. Opportunities for recovery and recycling of components/fillings are to be maximised.
You must complete the online Pre-Qualification Questionnaire (PQQ), which will be measured against selected criteria in terms of Commercial and Technical requirements. The weighting within the PQQ denotes Key User Requirements, Mandatory, Priority 1 and Priority 2 requirements. Evidence will be required to demonstrate the service offered can meet the Authority’s requirements set, which will include but not be limited to capability, capacity, security and experience based on a proven track record.
The closing date for completing the PQQ is 30/01/17.
Estimated value excluding VAT:
12 000 000 GBP
II.2.2) Information about options:

II.2.3) Information about renewals:
II.3) Duration of the contract or time limit for completion
Duration in months: 60 (from the award of the contract)

Section III: Legal, economic, financial and technical information
III.1) Conditions relating to the contract
III.1.1) Deposits and guarantees required:
III.1.2) Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:
III.1.3) Legal form to be taken by the group of economic operators to whom the contract is to be awarded:
III.1.4) Other particular conditions
III.2) Conditions for participation
III.2.1) Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers
The Authority will apply all the offences listed in Article 39(1) of Directive 2009/81/EC (implemented as Regulation 23(1) of the Defence and Security Public Contract Regulations (DSPCR) 2011 in the UK) and all of the professional misconducts listed at Article 39(2) of Directive 2009/81/EC (see also Regulation 23(2) in the DSPCR 2011) to the decision of whether a Candidate is eligible to be invited to tender.A full list of the Regulation 23(1) and 23(2) criteria are at will be required to sign a declaration confirming whether they do or do not have any of the listed criteria as part of the pre-qualification process.Candidates who have been convicted of any of the offences under Article 39(1) are ineligible and will not be selected to bid, unless there are overriding requirements in the general interest (including defence and security factors) for doing so.Candidates who are guilty of any of the offences, circumstances or misconduct under Article 39(2) may be excluded from being selected to bid at the discretion of the Authority.
III.2.2) Economic and financial ability

Minimum level(s) of standards possibly required:
III.2.3) Technical capacity
Information and formalities necessary for evaluating if the requirements are met:
Minimum level(s) of standards possibly required:
III.2.4) Information about reserved contracts
III.3) Conditions specific to services contracts
III.3.1) Information about a particular profession
Execution of the service is reserved to a particular profession:
III.3.2) Staff responsible for the execution of the service
Legal persons should indicate the names and professional qualifications of the staff responsible for the execution of the service:
Section IV: Procedure
IV.1) Type of procedure
IV.1.1) Type of procedure
Restricted
IV.1.2) Limitations on the number of operators who will be invited to tender or to participate
IV.1.3) Reduction of the number of operators during the negotiation or dialogue
IV.2) Award criteria
The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document
IV.2.2) Information about electronic auction

IV.3) Administrative information
IV.3.1) File reference number attributed by the contracting authority/entity
DGM/1801
IV.3.2) Previous publication(s) concerning the same contract
Prior information notice
Notice number in the OJEU:2016/S 085-150758of28.04.2016
IV.3.3) Conditions for obtaining specifications and additional documents or descriptive document
Payable documents: Yes
IV.3.4) Time limit for receipt of tenders or requests to participate
30.01.2017 – 10:00
IV.3.5) Date of dispatch of invitations to tender or to participate to selected candidates
IV.3.6) Language(s) in which tenders or requests to participate may be drawn up
EN
IV.3.7) Minimum time frame during which the tenderer must maintain the tender
In days:
IV.3.8) Conditions for opening of tenders

Section VI: Complementary information
VI.1) Information about recurrence
VI.2) Information about European Union funds
VI.3) Additional information
The Authority reserves the right to amend any condition related to security of information to reflect any changes in national law or government policy. If any contract documents are accompanied by instructions on safeguarding classified information (e.g. a Security Aspects Letter), the Authority reserves the right to amend the terms of these instructions to reflect any changes in national law or government policy, whether in respect of the applicable protective marking scheme, specific protective markings given, the aspects to which any protective marking applies, or otherwise. The link below to the Gov.uk website provides information on the Government Security Classification.

Advertising Regime OJEU:- This contract opportunity is published in the Official Journal of the European Union (OJEU), the MoD Defence Contracts Bulletin and www.contracts.mod.uk
Suppliers must read through this set of instructions and follow the process to respond to this opportunity.
The information and/or documents for this opportunity are available on
You must register on this site to respond, if you are already registered you will not need to register again, simply use your existing username and password. Please note there is a password reminder link on the homepage.
Suppliers must log in, go to your Response Manager and add the following Access Code: 95T8F7G3ZK.
Please ensure you follow any instruction provided to you here.
The deadline for submitting your response(s) is detailed within this contract notice, you will also have visibility of the deadline date, once you have added the Access code via DCO as the opening and closing date is visible within the opportunity.
Please ensure that you allow yourself plenty of time when responding to this opportunity prior to the closing date and time, especially if you have been asked to upload documents.
If you experience any difficulties please refer to the online Frequently Asked Questions (FAQ’s) or the User Guides or contact the MOD DCO Helpdesk by emailing support@contracts.mod.uk or Telephone 0800 282 324.
GO Reference: GO-20161221-DCB-9305133.
VI.4) Procedures for appeal
VI.4.1) Body responsible for appeal procedures:
Ministry of Defence, Weapons, Defence General Munitions (DGM) Project Team
Abbey Wood
Bristol
Postal code: BS34 8JH
United Kingdom
Phone: +44 3067983949
Email: DESWpnsDGM-ComrclMultiuser@mod.uk
Body responsible for mediation procedures:
Ministry of Defence, Weapons, Defence General Munitions (DGM) Project Team
Bristol
United Kingdom
Phone: +44 3067983949
Email: DESWpnsDGM-ComrclMultiuser@mod.uk
VI.4.3) Service from which information about the lodging of appeals may be obtained:
Ministry of Defence, Weapons, Defence General Munitions (DGM) Project Team
Bristol
United Kingdom
Phone: +44 3067983949
Email: DESWpnsDGM-ComrclMultiuser@mod.uk
VI.5) Date of dispatch of this notice:
21.12.2016